Thursday, May 9, 2013

Summer Project


CAMP CHAIR
Materials needed:
2 boards, ¾” x 12” x 30” coping saw
screws and screwdriver sandpaper
hammer paint and varnish
Cut chair back and set pieces
from plywood, following the
illustration. To cut out the
slot, first drill a hole in marked
area so you can put coping saw
blade in position to cut. Sand
smooth. Using the sides cut
out of piece #2, make 2 strips
12” long. Screw one of the
strips above the slot on the
back of piece #1 and the other
below the slot on the front of the same piece. Paint and varnish
as desired. How about your name and den name? Assemble the
chair by slipping piece #2 into the slot in piece #1. 
 
Hi all scout parents,
 
Here is the information on your scouts summer project.  This is for the Craftsman pin.  I Have done some research on the plywood and it would cost just as much to buy a 4x8 sheet divided among us, verses a 2x4 sheet as seen below.  You can go to the Webelo Blog site and get the instructions.  http://329webelos.blogspot.com/

 If anyone would like to come over and use our table saw and sander, you are more than welcome to do so.   The boys can do it together with their adult.  Because our summers books up fast, I am going to throw out some dates just in case you would like to come over.  I have Saturday June 22nd, Saturday June 29th and Saturday July 13th.  Let me know what dates will work best for you.     

The below information is just a suggestion.

Thanks,
Marianne

Home Depot

3/4 in. 2 ft. x 4 ft. Treated Pine Project Panel

Model # 1500124

Store SKU # 834001
Store SO SKU # Share this productFacebookTwitterNot available in your currently localized storeEnter zip code to check item availability
http://www.homedepot.com/wcsstore/hdus/en_US/images/btn_check_green.gif
$15.27 /EA-Each
This will make one chair

 

No comments:

Post a Comment